[svn] / trunk / xvidcore / src / motion / motion_est.c Repository:
ViewVC logotype

Diff of /trunk/xvidcore/src/motion/motion_est.c

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 504, Sat Sep 21 11:59:22 2002 UTC revision 524, Sun Sep 22 20:34:05 2002 UTC
# Line 843  Line 843 
843          return iMinSAD;          return iMinSAD;
844  }  }
845    
 /* Disabled bframe specific code */  
 #if 0  
   
 #define CHECK_MV16_F_INTERPOL(X,Y) { \  
   if ( ((X) <= f_max_dx) && ((X) >= f_min_dx) \  
     && ((Y) <= f_max_dy) && ((Y) >= f_min_dy) ) \  
   { \  
     iSAD = sad16bi( cur, \  
                         get_ref(f_pRef, f_pRefH, f_pRefV, f_pRefHV, x, y, 16, X, Y, iEdgedWidth),       \  
                         get_ref(b_pRef, b_pRefH, b_pRefV, b_pRefHV, x, y, 16, b_currMV->x, b_currMV->y, iEdgedWidth),   \  
                         iEdgedWidth); \  
     iSAD += calc_delta_16((X) - f_center_x, (Y) - f_center_y, (uint8_t)f_iFcode, iQuant);\  
     iSAD += calc_delta_16(b_currMV->x - b_center_x, b_currMV->y - b_center_y, (uint8_t)b_iFcode, iQuant);\  
     if (iSAD < iMinSAD) \  
     {  iMinSAD=iSAD; f_currMV->x=(X); f_currMV->y=(Y); } } \  
 }  
   
 #define CHECK_MV16_F_INTERPOL_FOUND(X,Y) { \  
   if ( ((X) <= f_max_dx) && ((X) >= f_min_dx) \  
     && ((Y) <= f_max_dy) && ((Y) >= f_min_dy) ) \  
   { \  
     iSAD = sad16bi( cur, \  
                         get_ref(f_pRef, f_pRefH, f_pRefV, f_pRefHV, x, y, 16, X, Y, iEdgedWidth),       \  
                         get_ref(b_pRef, b_pRefH, b_pRefV, b_pRefHV, x, y, 16, b_currMV->x, b_currMV->y, iEdgedWidth),   \  
                         iEdgedWidth); \  
     iSAD += calc_delta_16((X) - f_center_x, (Y) - f_center_y, (uint8_t)f_iFcode, iQuant);\  
     iSAD += calc_delta_16(b_currMV->x - b_center_x, b_currMV->y - b_center_y, (uint8_t)b_iFcode, iQuant);\  
     if (iSAD < iMinSAD) \  
     {  iMinSAD=iSAD; f_currMV->x=(X); f_currMV->y=(Y); iFound=0;} } \  
 }  
   
 #define CHECK_MV16_B_INTERPOL(X,Y) { \  
   if ( ((X) <= b_max_dx) && ((X) >= b_min_dx) \  
     && ((Y) <= b_max_dy) && ((Y) >= b_min_dy) ) \  
   { \  
     iSAD = sad16bi( cur, \  
                         get_ref(f_pRef, f_pRefH, f_pRefV, f_pRefHV, x, y, 16, f_currMV->x, f_currMV->y, iEdgedWidth),   \  
                         get_ref(b_pRef, b_pRefH, b_pRefV, b_pRefHV, x, y, 16, X, Y, iEdgedWidth),       \  
                         iEdgedWidth); \  
     iSAD += calc_delta_16(f_currMV->x - f_center_x, f_currMV->y - f_center_y, (uint8_t)f_iFcode, iQuant);\  
     iSAD += calc_delta_16((X) - b_center_x, (Y) - b_center_y, (uint8_t)b_iFcode, iQuant);\  
     if (iSAD < iMinSAD) \  
     {  iMinSAD=iSAD; b_currMV->x=(X); b_currMV->y=(Y); } } \  
 }  
   
 #define CHECK_MV16_B_INTERPOL_FOUND(X,Y) { \  
   if ( ((X) <= b_max_dx) && ((X) >= b_min_dx) \  
     && ((Y) <= b_max_dy) && ((Y) >= b_min_dy) ) \  
   { \  
     iSAD = sad16bi( cur, \  
                         get_ref(f_pRef, f_pRefH, f_pRefV, f_pRefHV, x, y, 16, f_currMV->x, f_currMV->y, iEdgedWidth),   \  
                         get_ref(b_pRef, b_pRefH, b_pRefV, b_pRefHV, x, y, 16, X, Y, iEdgedWidth),       \  
                         iEdgedWidth); \  
     iSAD += calc_delta_16(f_currMV->x - f_center_x, f_currMV->y - f_center_y, (uint8_t)f_iFcode, iQuant);\  
     iSAD += calc_delta_16((X) - b_center_x, (Y) - b_center_y, (uint8_t)b_iFcode, iQuant);\  
     if (iSAD < iMinSAD) \  
     {  iMinSAD=iSAD; b_currMV->x=(X); b_currMV->y=(Y); iFound=0;} } \  
 }  
   
   
 int32_t  
 Diamond16_InterpolMainSearch(const uint8_t * const f_pRef,  
                                                          const uint8_t * const f_pRefH,  
                                                          const uint8_t * const f_pRefV,  
                                                          const uint8_t * const f_pRefHV,  
   
                                                          const uint8_t * const cur,  
   
                                                          const uint8_t * const b_pRef,  
                                                          const uint8_t * const b_pRefH,  
                                                          const uint8_t * const b_pRefV,  
                                                          const uint8_t * const b_pRefHV,  
   
                                                          const int x,  
                                                          const int y,  
   
                                                          const int f_start_x,  
                                                          const int f_start_y,  
                                                          const int b_start_x,  
                                                          const int b_start_y,  
   
                                                          int iMinSAD,  
                                                          VECTOR * const f_currMV,  
                                                          VECTOR * const b_currMV,  
   
                                                          const int f_center_x,  
                                                          const int f_center_y,  
                                                          const int b_center_x,  
                                                          const int b_center_y,  
   
                                                          const int32_t f_min_dx,  
                                                          const int32_t f_max_dx,  
                                                          const int32_t f_min_dy,  
                                                          const int32_t f_max_dy,  
   
                                                          const int32_t b_min_dx,  
                                                          const int32_t b_max_dx,  
                                                          const int32_t b_min_dy,  
                                                          const int32_t b_max_dy,  
   
                                                          const int32_t iEdgedWidth,  
                                                          const int32_t iDiamondSize,  
   
                                                          const int32_t f_iFcode,  
                                                          const int32_t b_iFcode,  
   
                                                          const int32_t iQuant,  
                                                          int iFound)  
 {  
 /* Do a diamond search around given starting point, return SAD of best */  
   
         int32_t iSAD;  
   
         VECTOR f_backupMV;  
         VECTOR b_backupMV;  
   
         f_currMV->x = f_start_x;  
         f_currMV->y = f_start_y;  
         b_currMV->x = b_start_x;  
         b_currMV->y = b_start_y;  
   
         do  
         {  
                 iFound = 1;  
   
                 f_backupMV = *f_currMV;  
   
                 CHECK_MV16_F_INTERPOL_FOUND(f_backupMV.x - iDiamondSize, f_backupMV.y);  
                 CHECK_MV16_F_INTERPOL_FOUND(f_backupMV.x + iDiamondSize, f_backupMV.y);  
                 CHECK_MV16_F_INTERPOL_FOUND(f_backupMV.x, f_backupMV.y - iDiamondSize);  
                 CHECK_MV16_F_INTERPOL_FOUND(f_backupMV.x, f_backupMV.y + iDiamondSize);  
   
                 b_backupMV = *b_currMV;  
   
                 CHECK_MV16_B_INTERPOL_FOUND(b_backupMV.x - iDiamondSize, b_backupMV.y);  
                 CHECK_MV16_B_INTERPOL_FOUND(b_backupMV.x + iDiamondSize, b_backupMV.y);  
                 CHECK_MV16_B_INTERPOL_FOUND(b_backupMV.x, b_backupMV.y - iDiamondSize);  
                 CHECK_MV16_B_INTERPOL_FOUND(b_backupMV.x, b_backupMV.y + iDiamondSize);  
   
         } while (!iFound);  
   
         return iMinSAD;  
 }  
   
 /* Sorry, these MACROS really got too large... I'll turn them into function soon! */  
   
 #define CHECK_MV16_DIRECT_FOUND(X,Y) \  
         if ( (X)>=(-32) && (X)<=(31) && ((Y)>=-32) && ((Y)<=31) ) \  
         { int k;\  
         VECTOR mvs,b_mvs;       \  
         iSAD = 0;\  
         for (k = 0; k < 4; k++) {       \  
                                         mvs.x = (int32_t) ((TRB * directmv[k].x) / TRD + (X));          \  
                     b_mvs.x = (int32_t) (((X) == 0)                                                     \  
                                                                                 ? ((TRB - TRD) * directmv[k].x) / TRD   \  
                                             : mvs.x - directmv[k].x);                           \  
                                                                                                                                                                 \  
                     mvs.y = (int32_t) ((TRB * directmv[k].y) / TRD + (Y));              \  
                         b_mvs.y = (int32_t) (((Y) == 0)                                                         \  
                                                                                 ? ((TRB - TRD) * directmv[k].y) / TRD   \  
                                             : mvs.y - directmv[k].y);                           \  
                                                                                                                                                                 \  
   if ( (mvs.x <= max_dx) && (mvs.x >= min_dx) \  
     && (mvs.y <= max_dy) && (mvs.y >= min_dy)  \  
         && (b_mvs.x <= max_dx) && (b_mvs.x >= min_dx)  \  
     && (b_mvs.y <= max_dy) && (b_mvs.y >= min_dy) ) { \  
             iSAD += sad8bi( cur + 8*(k&1) + 8*(k>>1)*iEdgedWidth,                                                                                                       \  
                         get_ref(f_pRef, f_pRefH, f_pRefV, f_pRefHV, 2*x+(k&1), 2*y+(k>>1), 8, \  
                                         mvs.x, mvs.y, iEdgedWidth),                                                             \  
                         get_ref(b_pRef, b_pRefH, b_pRefV, b_pRefHV, 2*x+(k&1), 2*y+(k>>1), 8, \  
                                         b_mvs.x, b_mvs.y, iEdgedWidth),                                                         \  
                         iEdgedWidth); \  
                 }       \  
         else    \  
                 iSAD = 65535;   \  
         } \  
         iSAD += calc_delta_16((X),(Y), 1, iQuant);\  
         if (iSAD < iMinSAD) \  
             {  iMinSAD=iSAD; currMV->x=(X); currMV->y=(Y); iFound=0; } \  
 }  
   
   
   
 int32_t  
 Diamond16_DirectMainSearch(  
                                         const uint8_t * const f_pRef,  
                                         const uint8_t * const f_pRefH,  
                                         const uint8_t * const f_pRefV,  
                                         const uint8_t * const f_pRefHV,  
   
                                         const uint8_t * const cur,  
   
                                         const uint8_t * const b_pRef,  
                                         const uint8_t * const b_pRefH,  
                                         const uint8_t * const b_pRefV,  
                                         const uint8_t * const b_pRefHV,  
   
                                         const int x,  
                                         const int y,  
   
                                         const int TRB,  
                                         const int TRD,  
   
                                     const int start_x,  
                                     const int start_y,  
   
                                     int iMinSAD,  
                                     VECTOR * const currMV,  
                                         const VECTOR * const directmv,  
   
                                     const int32_t min_dx,  
                                         const int32_t max_dx,  
                                         const int32_t min_dy,  
                                         const int32_t max_dy,  
   
                                         const int32_t iEdgedWidth,  
                                         const int32_t iDiamondSize,  
   
                                         const int32_t iQuant,  
                                         int iFound)  
 {  
 /* Do a diamond search around given starting point, return SAD of best */  
   
         int32_t iSAD;  
   
         VECTOR backupMV;  
   
         currMV->x = start_x;  
         currMV->y = start_y;  
   
 /* It's one search with full Diamond pattern, and only 3 of 4 for all following diamonds */  
   
         do  
         {  
                 iFound = 1;  
   
                 backupMV = *currMV;  
   
                 CHECK_MV16_DIRECT_FOUND(backupMV.x - iDiamondSize, backupMV.y);  
                 CHECK_MV16_DIRECT_FOUND(backupMV.x + iDiamondSize, backupMV.y);  
                 CHECK_MV16_DIRECT_FOUND(backupMV.x, backupMV.y - iDiamondSize);  
                 CHECK_MV16_DIRECT_FOUND(backupMV.x, backupMV.y + iDiamondSize);  
   
         } while (!iFound);  
   
         return iMinSAD;  
 }  
   
 #endif /* 0 */  
   
846  int32_t  int32_t
847  AdvDiamond8_MainSearch(const uint8_t * const pRef,  AdvDiamond8_MainSearch(const uint8_t * const pRef,
848                                             const uint8_t * const pRefH,                                             const uint8_t * const pRefH,
# Line 2786  Line 2536 
2536          currPMV->y = currMV->y - center_y;          currPMV->y = currMV->y - center_y;
2537          return iMinSAD;          return iMinSAD;
2538  }  }
   
   
 /* Disabled bframe specific code */  
 # if 0  
 int32_t  
 PMVfastIntSearch16(const uint8_t * const pRef,  
                                 const uint8_t * const pRefH,  
                                 const uint8_t * const pRefV,  
                                 const uint8_t * const pRefHV,  
                                 const IMAGE * const pCur,  
                                 const int x,  
                                 const int y,  
                                 const int start_x,              /* start should be most likely vector */  
                                 const int start_y,  
                                 const int center_x,             /* center is from where length of MVs is measured */  
                                 const int center_y,  
                                 const uint32_t MotionFlags,  
                                 const uint32_t iQuant,  
                                 const uint32_t iFcode,  
                                 const MBParam * const pParam,  
                                 const MACROBLOCK * const pMBs,  
                                 const MACROBLOCK * const prevMBs,  
                                 VECTOR * const currMV,  
                                 VECTOR * const currPMV)  
 {  
         const uint32_t iWcount = pParam->mb_width;  
         const int32_t iWidth = pParam->width;  
         const int32_t iHeight = pParam->height;  
         const int32_t iEdgedWidth = pParam->edged_width;  
   
         const uint8_t *cur = pCur->y + x * 16 + y * 16 * iEdgedWidth;  
         const VECTOR zeroMV = { 0, 0 };  
   
         int32_t iDiamondSize;  
   
         int32_t min_dx;  
         int32_t max_dx;  
         int32_t min_dy;  
         int32_t max_dy;  
   
         int32_t iFound;  
   
         VECTOR newMV;  
         VECTOR backupMV;  
   
         VECTOR pmv[4];  
         int32_t psad[4];  
   
         MainSearch16FuncPtr MainSearchPtr;  
   
         MACROBLOCK *const prevMB = (MACROBLOCK *const)prevMBs + x + y * iWcount;  
         MACROBLOCK *const pMB = (MACROBLOCK *const)(pMBs + x + y * iWcount);  
   
         int32_t threshA, threshB;  
         int32_t bPredEq;  
         int32_t iMinSAD, iSAD;  
   
   
 /* Get maximum range */  
         get_range(&min_dx, &max_dx, &min_dy, &max_dy, x, y, 16, iWidth, iHeight,  
                           iFcode);  
   
 /* we work with abs. MVs, not relative to prediction, so get_range is called relative to 0,0 */  
   
         if ((x == 0) && (y == 0)) {  
                 threshA = 512;  
                 threshB = 1024;  
   
                 bPredEq = 0;  
                 psad[0] = psad[1] = psad[2] = psad[3] = 0;  
                 *currMV = pmv[0] = pmv[1] = pmv[2] = pmv[3] = zeroMV;  
   
         } else {  
   
                 bPredEq = get_ipmvdata(pMBs, iWcount, 0, x, y, 0, pmv, psad);  
   
                 threshA = psad[0];  
                 threshB = threshA + 256;  
                 if (threshA < 512)  
                         threshA = 512;  
                 if (threshA > 1024)  
                         threshA = 1024;  
                 if (threshB > 1792)  
                         threshB = 1792;  
   
                 *currMV = pmv[0];                       /* current best := prediction */  
         }  
   
         iFound = 0;  
   
 /* Step 4: Calculate SAD around the Median prediction.  
    MinSAD=SAD  
    If Motion Vector equal to Previous frame motion vector  
    and MinSAD<PrevFrmSAD goto Step 10.  
    If SAD<=256 goto Step 10.  
 */  
   
         if (currMV->x > max_dx) {  
                 currMV->x = EVEN(max_dx);  
         }  
         if (currMV->x < min_dx) {  
                 currMV->x = EVEN(min_dx);  
         }  
         if (currMV->y > max_dy) {  
                 currMV->y = EVEN(max_dy);  
         }  
         if (currMV->y < min_dy) {  
                 currMV->y = EVEN(min_dy);  
         }  
   
         iMinSAD =  
                 sad16(cur,  
                           get_iref_mv(pRef, x, y, 16, currMV,  
                                                  iEdgedWidth), iEdgedWidth, MV_MAX_ERROR);  
         iMinSAD +=  
                 calc_delta_16(currMV->x - center_x, currMV->y - center_y,  
                                           (uint8_t) iFcode, iQuant);  
   
         if ((iMinSAD < 256) ||  
                 ((MVequal(*currMV, prevMB->i_mvs[0])) &&  
                  ((int32_t) iMinSAD < prevMB->i_sad16))) {  
                 if (iMinSAD < (int)(2 * iQuant))        // high chances for SKIP-mode  
                 {  
                         if (!MVzero(*currMV)) {  
                                 iMinSAD += MV16_00_BIAS;  
                                 CHECK_MV16_ZERO;        // (0,0) saves space for letterboxed pictures  
                                 iMinSAD -= MV16_00_BIAS;  
                         }  
                 }  
   
                 if (MotionFlags & PMV_EARLYSTOP16)  
                         goto PMVfastInt16_Terminate_with_Refine;  
         }  
   
   
 /* Step 2 (lazy eval): Calculate Distance= |MedianMVX| + |MedianMVY| where MedianMV is the motion  
    vector of the median.  
    If PredEq=1 and MVpredicted = Previous Frame MV, set Found=2  
 */  
   
         if ((bPredEq) && (MVequal(pmv[0], prevMB->i_mvs[0])))  
                 iFound = 2;  
   
 /* Step 3 (lazy eval): If Distance>0 or thresb<1536 or PredEq=1 Select small Diamond Search.  
    Otherwise select large Diamond Search.  
 */  
   
         if ((!MVzero(pmv[0])) || (threshB < 1536) || (bPredEq))  
                 iDiamondSize = 2;               // halfpel units!  
         else  
                 iDiamondSize = 4;               // halfpel units!  
   
 /*  
    Step 5: Calculate SAD for motion vectors taken from left block, top, top-right, and Previous frame block.  
    Also calculate (0,0) but do not subtract offset.  
    Let MinSAD be the smallest SAD up to this point.  
    If MV is (0,0) subtract offset.  
 */  
   
 // (0,0) is often a good choice  
   
         if (!MVzero(pmv[0]))  
                 CHECK_MV16_ZERO;  
   
 // previous frame MV is always possible  
   
         if (!MVzero(prevMB->i_mvs[0]))  
                 if (!MVequal(prevMB->i_mvs[0], pmv[0]))  
                         CHECK_MV16_CANDIDATE(prevMB->i_mvs[0].x, prevMB->i_mvs[0].y);  
   
 // left neighbour, if allowed  
   
         if (!MVzero(pmv[1]))  
                 if (!MVequal(pmv[1], prevMB->i_mvs[0]))  
                         if (!MVequal(pmv[1], pmv[0]))  
                                 CHECK_MV16_CANDIDATE(pmv[1].x, pmv[1].y);  
   
 // top neighbour, if allowed  
         if (!MVzero(pmv[2]))  
                 if (!MVequal(pmv[2], prevMB->i_mvs[0]))  
                         if (!MVequal(pmv[2], pmv[0]))  
                                 if (!MVequal(pmv[2], pmv[1]))  
                                         CHECK_MV16_CANDIDATE(pmv[2].x, pmv[2].y);  
   
 // top right neighbour, if allowed  
                                         if (!MVzero(pmv[3]))  
                                                 if (!MVequal(pmv[3], prevMB->i_mvs[0]))  
                                                         if (!MVequal(pmv[3], pmv[0]))  
                                                                 if (!MVequal(pmv[3], pmv[1]))  
                                                                         if (!MVequal(pmv[3], pmv[2]))  
                                                                                 CHECK_MV16_CANDIDATE(pmv[3].x,  
                                                                                                                          pmv[3].y);  
   
         if ((MVzero(*currMV)) &&  
                 (!MVzero(pmv[0])) /* && (iMinSAD <= iQuant * 96) */ )  
                 iMinSAD -= MV16_00_BIAS;  
   
   
 /* Step 6: If MinSAD <= thresa goto Step 10.  
    If Motion Vector equal to Previous frame motion vector and MinSAD<PrevFrmSAD goto Step 10.  
 */  
   
         if ((iMinSAD <= threshA) ||  
                 (MVequal(*currMV, prevMB->i_mvs[0]) &&  
                  ((int32_t) iMinSAD < prevMB->i_sad16))) {  
   
                 if (MotionFlags & PMV_EARLYSTOP16)  
                         goto PMVfastInt16_Terminate_with_Refine;  
         }  
   
   
 /************ (Diamond Search)  **************/  
 /*  
    Step 7: Perform Diamond search, with either the small or large diamond.  
    If Found=2 only examine one Diamond pattern, and afterwards goto step 10  
    Step 8: If small diamond, iterate small diamond search pattern until motion vector lies in the center of the diamond.  
    If center then goto step 10.  
    Step 9: If large diamond, iterate large diamond search pattern until motion vector lies in the center.  
    Refine by using small diamond and goto step 10.  
 */  
   
         if (MotionFlags & PMV_USESQUARES16)  
                 MainSearchPtr = Square16_MainSearch;  
         else if (MotionFlags & PMV_ADVANCEDDIAMOND16)  
                 MainSearchPtr = AdvDiamond16_MainSearch;  
         else  
                 MainSearchPtr = Diamond16_MainSearch;  
   
         backupMV = *currMV;                     /* save best prediction, actually only for EXTSEARCH */  
   
   
 /* default: use best prediction as starting point for one call of PMVfast_MainSearch */  
         iSAD =  
                 (*MainSearchPtr) (pRef, pRefH, pRefV, pRefHV, cur, x, y, currMV->x,  
                                                   currMV->y, iMinSAD, &newMV, center_x, center_y, min_dx, max_dx,  
                                                   min_dy, max_dy, iEdgedWidth, iDiamondSize, iFcode,  
                                                   iQuant, iFound);  
   
         if (iSAD < iMinSAD) {  
                 *currMV = newMV;  
                 iMinSAD = iSAD;  
         }  
   
         if (MotionFlags & PMV_EXTSEARCH16) {  
 /* extended: search (up to) two more times: orignal prediction and (0,0) */  
   
                 if (!(MVequal(pmv[0], backupMV))) {  
                         iSAD =  
                                 (*MainSearchPtr) (pRef, pRefH, pRefV, pRefHV, cur, x, y,  
                                                                   pmv[0].x, pmv[0].y, iMinSAD, &newMV, center_x, center_y,  
                                                                   min_dx, max_dx, min_dy, max_dy, iEdgedWidth,  
                                                                   iDiamondSize, iFcode, iQuant, iFound);  
   
                         if (iSAD < iMinSAD) {  
                                 *currMV = newMV;  
                                 iMinSAD = iSAD;  
                         }  
                 }  
   
                 if ((!(MVzero(pmv[0]))) && (!(MVzero(backupMV)))) {  
                         iSAD =  
                                 (*MainSearchPtr) (pRef, pRefH, pRefV, pRefHV, cur, x, y, 0, 0,  
                                                                   iMinSAD, &newMV, center_x, center_y, min_dx, max_dx, min_dy,  
                                                                   max_dy, iEdgedWidth, iDiamondSize, iFcode,  
                                                                   iQuant, iFound);  
   
                         if (iSAD < iMinSAD) {  
                                 *currMV = newMV;  
                                 iMinSAD = iSAD;  
                         }  
                 }  
         }  
   
 /*  
    Step 10:  The motion vector is chosen according to the block corresponding to MinSAD.  
 */  
   
 PMVfastInt16_Terminate_with_Refine:  
   
         pMB->i_mvs[0] = pMB->i_mvs[1] = pMB->i_mvs[2] = pMB->i_mvs[3] = pMB->i_mv16 = *currMV;  
         pMB->i_sad8[0] = pMB->i_sad8[1] = pMB->i_sad8[2] = pMB->i_sad8[3] = pMB->i_sad16 = iMinSAD;  
   
         if (MotionFlags & PMV_HALFPELREFINE16)  // perform final half-pel step  
                 iMinSAD =  
                         Halfpel16_Refine(pRef, pRefH, pRefV, pRefHV, cur, x, y, currMV,  
                                                          iMinSAD, center_x, center_y, min_dx, max_dx, min_dy, max_dy,  
                                                          iFcode, iQuant, iEdgedWidth);  
   
         pmv[0] = get_pmv2(pMBs, pParam->mb_width, 0, x, y, 0);          // get _REAL_ prediction (halfpel possible)  
   
         currPMV->x = currMV->x - center_x;  
         currPMV->y = currMV->y - center_y;  
         return iMinSAD;  
 }  
 #endif /* 0 */  

Legend:
Removed from v.504  
changed lines
  Added in v.524

No admin address has been configured
ViewVC Help
Powered by ViewVC 1.0.4