--- trunk/xvidcore/build/win32/libxvidcore.dsp	2002/09/21 02:29:39	498
+++ trunk/xvidcore/build/win32/libxvidcore.dsp	2002/09/21 15:16:48	505
@@ -121,10 +121,64 @@
 # Begin Source File
 
 SOURCE=..\..\src\bitstream\x86_asm\cbp_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\bitstream\x86_asm\cbp_mmx.asm
+InputName=cbp_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\bitstream\x86_asm\cbp_mmx.asm
+InputName=cbp_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\bitstream\x86_asm\cbp_sse2.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\bitstream\x86_asm\cbp_sse2.asm
+InputName=cbp_sse2
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\bitstream\x86_asm\cbp_sse2.asm
+InputName=cbp_sse2
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # End Group
 # Begin Group "bitstream_h"
@@ -173,10 +227,64 @@
 # Begin Source File
 
 SOURCE=..\..\src\dct\x86_asm\fdct_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\dct\x86_asm\fdct_mmx.asm
+InputName=fdct_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\dct\x86_asm\fdct_mmx.asm
+InputName=fdct_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\dct\x86_asm\idct_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\dct\x86_asm\idct_mmx.asm
+InputName=idct_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\dct\x86_asm\idct_mmx.asm
+InputName=idct_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # End Group
 # Begin Group "dct_h"
@@ -209,38 +317,281 @@
 # Begin Source File
 
 SOURCE=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
+InputName=interpolate8x8_3dn
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
+InputName=interpolate8x8_3dn
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
+InputName=interpolate8x8_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
+InputName=interpolate8x8_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
+InputName=interpolate8x8_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
+InputName=interpolate8x8_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\x86_asm\rgb_to_yv12_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\image\x86_asm\rgb_to_yv12_mmx.asm
+InputName=rgb_to_yv12_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\image\x86_asm\rgb_to_yv12_mmx.asm
+InputName=rgb_to_yv12_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\x86_asm\yuv_to_yv12_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\image\x86_asm\yuv_to_yv12_mmx.asm
+InputName=yuv_to_yv12_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\image\x86_asm\yuv_to_yv12_mmx.asm
+InputName=yuv_to_yv12_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\x86_asm\yuyv_to_yv12_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\image\x86_asm\yuyv_to_yv12_mmx.asm
+InputName=yuyv_to_yv12_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\image\x86_asm\yuyv_to_yv12_mmx.asm
+InputName=yuyv_to_yv12_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\x86_asm\yv12_to_rgb24_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\image\x86_asm\yv12_to_rgb24_mmx.asm
+InputName=yv12_to_rgb24_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\image\x86_asm\yv12_to_rgb24_mmx.asm
+InputName=yv12_to_rgb24_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\x86_asm\yv12_to_rgb32_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\image\x86_asm\yv12_to_rgb32_mmx.asm
+InputName=yv12_to_rgb32_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\image\x86_asm\yv12_to_rgb32_mmx.asm
+InputName=yv12_to_rgb32_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\x86_asm\yv12_to_yuyv_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\image\x86_asm\yv12_to_yuyv_mmx.asm
+InputName=yv12_to_yuyv_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\image\x86_asm\yv12_to_yuyv_mmx.asm
+InputName=yv12_to_yuyv_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # End Group
 # Begin Group "image_h"
@@ -285,23 +636,123 @@
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # PROP Ignore_Default_Tool 1
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\motion\x86_asm\sad_3dn.asm
+InputName=sad_3dn
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
 
 !ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
 
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\motion\x86_asm\sad_3dn.asm
+InputName=sad_3dn
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
 !ENDIF 
 
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\motion\x86_asm\sad_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\motion\x86_asm\sad_mmx.asm
+InputName=sad_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\motion\x86_asm\sad_mmx.asm
+InputName=sad_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\motion\x86_asm\sad_sse2.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\motion\x86_asm\sad_sse2.asm
+InputName=sad_sse2
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\motion\x86_asm\sad_sse2.asm
+InputName=sad_sse2
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\motion\x86_asm\sad_xmm.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\motion\x86_asm\sad_xmm.asm
+InputName=sad_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\motion\x86_asm\sad_xmm.asm
+InputName=sad_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # End Group
 # Begin Group "motion_h"
@@ -354,10 +805,64 @@
 # Begin Source File
 
 SOURCE=..\..\src\quant\x86_asm\quantize4_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\quant\x86_asm\quantize4_mmx.asm
+InputName=quantize4_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\quant\x86_asm\quantize4_mmx.asm
+InputName=quantize4_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\quant\x86_asm\quantize_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\quant\x86_asm\quantize_mmx.asm
+InputName=quantize_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\quant\x86_asm\quantize_mmx.asm
+InputName=quantize_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # End Group
 # Begin Group "quant_h"
@@ -406,10 +911,64 @@
 # Begin Source File
 
 SOURCE=..\..\src\utils\x86_asm\cpuid.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\utils\x86_asm\cpuid.asm
+InputName=cpuid
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\utils\x86_asm\cpuid.asm
+InputName=cpuid
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\utils\x86_asm\mem_transfer_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\utils\x86_asm\mem_transfer_mmx.asm
+InputName=mem_transfer_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\utils\x86_asm\mem_transfer_mmx.asm
+InputName=mem_transfer_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
 # End Group
 # Begin Group "utils_h"