# Microsoft Developer Studio Project File - Name="libxvidcore" - Package Owner=<4> # Microsoft Developer Studio Generated Build File, Format Version 6.00 # ** DO NOT EDIT ** # TARGTYPE "Win32 (x86) Static Library" 0x0104 CFG=libxvidcore - Win32 Debug !MESSAGE This is not a valid makefile. To build this project using NMAKE, !MESSAGE use the Export Makefile command and run !MESSAGE !MESSAGE NMAKE /f "libxvidcore.mak". !MESSAGE !MESSAGE You can specify a configuration when running NMAKE !MESSAGE by defining the macro CFG on the command line. For example: !MESSAGE !MESSAGE NMAKE /f "libxvidcore.mak" CFG="libxvidcore - Win32 Debug" !MESSAGE !MESSAGE Possible choices for configuration are: !MESSAGE !MESSAGE "libxvidcore - Win32 Release" (based on "Win32 (x86) Static Library") !MESSAGE "libxvidcore - Win32 Debug" (based on "Win32 (x86) Static Library") !MESSAGE # Begin Project # PROP AllowPerConfigDependencies 0 # PROP Scc_ProjName "" # PROP Scc_LocalPath "" CPP=cl.exe RSC=rc.exe !IF "$(CFG)" == "libxvidcore - Win32 Release" # PROP BASE Use_MFC 0 # PROP BASE Use_Debug_Libraries 0 # PROP BASE Output_Dir "Release" # PROP BASE Intermediate_Dir "Release" # PROP BASE Target_Dir "" # PROP Use_MFC 0 # PROP Use_Debug_Libraries 0 # PROP Output_Dir "Release" # PROP Intermediate_Dir "Release" # PROP Target_Dir "" # ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c # ADD CPP /nologo /G6 /W3 /GX /Op /Ob2 /D "NDEBUG" /D "ARCH_IS_IA32" /D "ARCH_IS_32BIT" /D "ARCH_IS_LITTLE_ENDIAN" /D "WIN32" /D "_MBCS" /D "_LIB" /FAcs /YX /FD /O2 -QxK /Qunroll /c # SUBTRACT CPP /Fr # ADD BASE RSC /l 0xc09 /d "NDEBUG" # ADD RSC /l 0xc09 /d "NDEBUG" BSC32=bscmake.exe # ADD BASE BSC32 /nologo # ADD BSC32 /nologo LIB32=link.exe -lib # ADD BASE LIB32 /nologo # ADD LIB32 /nologo /out:"bin\libxvidcore.lib" !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # PROP BASE Use_MFC 0 # PROP BASE Use_Debug_Libraries 1 # PROP BASE Output_Dir "Debug" # PROP BASE Intermediate_Dir "Debug" # PROP BASE Target_Dir "" # PROP Use_MFC 0 # PROP Use_Debug_Libraries 1 # PROP Output_Dir "Debug" # PROP Intermediate_Dir "Debug" # PROP Target_Dir "" # ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c # ADD CPP /nologo /MTd /W4 /Gm /GX /ZI /Od /D "_DEBUG" /D "ARCH_IS_IA32" /D "ARCH_IS_32BIT" /D "ARCH_IS_LITTLE_ENDIAN" /D "WIN32" /D "_MBCS" /D "_LIB" /FR /YX /FD /GZ /c # ADD BASE RSC /l 0xc09 /d "_DEBUG" # ADD RSC /l 0xc09 /d "_DEBUG" BSC32=bscmake.exe # ADD BASE BSC32 /nologo # ADD BSC32 /nologo LIB32=link.exe -lib # ADD BASE LIB32 /nologo # ADD LIB32 /nologo /out:"bin\libxvidcore.lib" !ENDIF # Begin Target # Name "libxvidcore - Win32 Release" # Name "libxvidcore - Win32 Debug" # Begin Group "docs" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\AUTHORS # End Source File # Begin Source File SOURCE=..\..\ChangeLog # End Source File # Begin Source File SOURCE=..\..\CodingStyle # End Source File # Begin Source File SOURCE=..\..\LICENSE # End Source File # Begin Source File SOURCE=..\..\README # End Source File # Begin Source File SOURCE=..\..\TODO # End Source File # Begin Source File SOURCE="..\..\doc\README" # End Source File # Begin Source File SOURCE="..\..\doc\INSTALL" # End Source File # End Group # Begin Group "bitstream" # PROP Default_Filter "" # Begin Group "bitstream_asm" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\bitstream\x86_asm\cbp_3dne.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\bitstream\x86_asm\cbp_3dne.asm InputName=cbp_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\bitstream\x86_asm\cbp_3dne.asm InputName=cbp_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\bitstream\x86_asm\cbp_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\bitstream\x86_asm\cbp_mmx.asm InputName=cbp_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\bitstream\x86_asm\cbp_mmx.asm InputName=cbp_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\bitstream\x86_asm\cbp_sse2.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\bitstream\x86_asm\cbp_sse2.asm InputName=cbp_sse2 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\bitstream\x86_asm\cbp_sse2.asm InputName=cbp_sse2 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # End Group # Begin Group "bitstream_h" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\bitstream\bitstream.h # End Source File # Begin Source File SOURCE=..\..\src\bitstream\cbp.h # End Source File # Begin Source File SOURCE=..\..\src\bitstream\mbcoding.h # End Source File # Begin Source File SOURCE=..\..\src\bitstream\vlc_codes.h # End Source File # Begin Source File SOURCE=..\..\src\bitstream\zigzag.h # End Source File # End Group # Begin Source File SOURCE=..\..\src\bitstream\bitstream.c # End Source File # Begin Source File SOURCE=..\..\src\bitstream\cbp.c # End Source File # Begin Source File SOURCE=..\..\src\bitstream\mbcoding.c # End Source File # End Group # Begin Group "dct" # PROP Default_Filter "" # Begin Group "dct_asm" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\dct\x86_asm\fdct_mmx_ffmpeg.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\dct\x86_asm\fdct_mmx_ffmpeg.asm InputName=fdct_mmx_ffmpeg "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\dct\x86_asm\fdct_mmx_ffmpeg.asm InputName=fdct_mmx_ffmpeg "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\dct\x86_asm\fdct_mmx_skal.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\dct\x86_asm\fdct_mmx_skal.asm InputName=fdct_mmx_skal "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\dct\x86_asm\fdct_mmx_skal.asm InputName=fdct_mmx_skal "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\dct\x86_asm\fdct_sse2_skal.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\dct\x86_asm\fdct_sse2_skal.asm InputName=fdct_sse2_skal "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\dct\x86_asm\fdct_sse2_skal.asm InputName=fdct_sse2_skal "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\dct\x86_asm\idct_3dne.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\dct\x86_asm\idct_3dne.asm InputName=idct_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\dct\x86_asm\idct_3dne.asm InputName=idct_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\dct\x86_asm\idct_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\dct\x86_asm\idct_mmx.asm InputName=idct_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\dct\x86_asm\idct_mmx.asm InputName=idct_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\dct\x86_asm\idct_sse2_dmitry.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\dct\x86_asm\idct_sse2_dmitry.asm InputName=idct_sse2_dmitry "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\dct\x86_asm\idct_sse2_dmitry.asm InputName=idct_sse2_dmitry "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\dct\x86_asm\simple_idct_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\dct\x86_asm\simple_idct_mmx.asm InputName=simple_idct_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\dct\x86_asm\simple_idct_mmx.asm InputName=simple_idct_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # End Group # Begin Group "dct_h" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\dct\fdct.h # End Source File # Begin Source File SOURCE=..\..\src\dct\idct.h # End Source File # End Group # Begin Source File SOURCE=..\..\src\dct\fdct.c # End Source File # Begin Source File SOURCE=..\..\src\dct\idct.c # End Source File # Begin Source File SOURCE=..\..\src\dct\simple_idct.c # End Source File # End Group # Begin Group "image" # PROP Default_Filter "" # Begin Group "image_asm" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\image\x86_asm\colorspace_mmx.inc # End Source File # Begin Source File SOURCE=..\..\src\image\x86_asm\colorspace_rgb_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) InputDir=\xvidcore\src\image\x86_asm IntDir=.\Release InputPath=..\..\src\image\x86_asm\colorspace_rgb_mmx.asm InputName=colorspace_rgb_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -I"$(InputDir)"\ -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) InputDir=\xvidcore\src\image\x86_asm IntDir=.\Debug InputPath=..\..\src\image\x86_asm\colorspace_rgb_mmx.asm InputName=colorspace_rgb_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -I"$(InputDir)"\ -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\image\x86_asm\colorspace_yuv_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) InputDir=\xvidcore\src\image\x86_asm IntDir=.\Release InputPath=..\..\src\image\x86_asm\colorspace_yuv_mmx.asm InputName=colorspace_yuv_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -I"$(InputDir)"\ -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) InputDir=\xvidcore\src\image\x86_asm IntDir=.\Debug InputPath=..\..\src\image\x86_asm\colorspace_yuv_mmx.asm InputName=colorspace_yuv_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -I"$(InputDir)"\ -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\image\x86_asm\colorspace_yuyv_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) InputDir=\xvidcore\src\image\x86_asm IntDir=.\Release InputPath=..\..\src\image\x86_asm\colorspace_yuyv_mmx.asm InputName=colorspace_yuyv_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -I"$(InputDir)"\ -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) InputDir=\xvidcore\src\image\x86_asm IntDir=.\Debug InputPath=..\..\src\image\x86_asm\colorspace_yuyv_mmx.asm InputName=colorspace_yuyv_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -I"$(InputDir)"\ -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\image\x86_asm\interpolate8x8_3dn.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm InputName=interpolate8x8_3dn "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm InputName=interpolate8x8_3dn "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\image\x86_asm\interpolate8x8_3dne.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\image\x86_asm\interpolate8x8_3dne.asm InputName=interpolate8x8_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\image\x86_asm\interpolate8x8_3dne.asm InputName=interpolate8x8_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\image\x86_asm\interpolate8x8_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm InputName=interpolate8x8_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm InputName=interpolate8x8_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\image\x86_asm\interpolate8x8_xmm.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm InputName=interpolate8x8_xmm "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm InputName=interpolate8x8_xmm "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\image\x86_asm\qpel_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\image\x86_asm\qpel_mmx.asm InputName=qpel_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\image\x86_asm\qpel_mmx.asm InputName=qpel_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\image\x86_asm\reduced_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\image\x86_asm\reduced_mmx.asm InputName=reduced_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\image\x86_asm\reduced_mmx.asm InputName=reduced_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # End Group # Begin Group "image_h" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\image\colorspace.h # End Source File # Begin Source File SOURCE=..\..\src\image\font.h # End Source File # Begin Source File SOURCE=..\..\src\image\image.h # End Source File # Begin Source File SOURCE=..\..\src\image\interpolate8x8.h # End Source File # Begin Source File SOURCE=..\..\src\image\reduced.h # End Source File # End Group # Begin Source File SOURCE=..\..\src\image\colorspace.c # End Source File # Begin Source File SOURCE=..\..\src\image\font.c # End Source File # Begin Source File SOURCE=..\..\src\image\image.c # End Source File # Begin Source File SOURCE=..\..\src\image\interpolate8x8.c # End Source File # Begin Source File SOURCE=..\..\src\image\qpel.c # End Source File # Begin Source File SOURCE=..\..\src\image\reduced.c # End Source File # End Group # Begin Group "motion" # PROP Default_Filter "" # Begin Group "motion_asm" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\motion\x86_asm\sad_3dn.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # PROP Ignore_Default_Tool 1 # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\motion\x86_asm\sad_3dn.asm InputName=sad_3dn "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\motion\x86_asm\sad_3dn.asm InputName=sad_3dn "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\motion\x86_asm\sad_3dne.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\motion\x86_asm\sad_3dne.asm InputName=sad_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\motion\x86_asm\sad_3dne.asm InputName=sad_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\motion\x86_asm\sad_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\motion\x86_asm\sad_mmx.asm InputName=sad_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\motion\x86_asm\sad_mmx.asm InputName=sad_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\motion\x86_asm\sad_sse2.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\motion\x86_asm\sad_sse2.asm InputName=sad_sse2 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\motion\x86_asm\sad_sse2.asm InputName=sad_sse2 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\motion\x86_asm\sad_xmm.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\motion\x86_asm\sad_xmm.asm InputName=sad_xmm "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\motion\x86_asm\sad_xmm.asm InputName=sad_xmm "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # End Group # Begin Group "motion_h" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\motion\estimation.h # End Source File # Begin Source File SOURCE=..\..\src\motion\gmc.h # End Source File # Begin Source File SOURCE=..\..\src\motion\motion.h # End Source File # Begin Source File SOURCE=..\..\src\motion\motion_inlines.h # End Source File # Begin Source File SOURCE=..\..\src\motion\sad.h # End Source File # End Group # Begin Source File SOURCE=..\..\src\motion\estimation_bvop.c # End Source File # Begin Source File SOURCE=..\..\src\motion\estimation_common.c # End Source File # Begin Source File SOURCE=..\..\src\motion\estimation_gmc.c # End Source File # Begin Source File SOURCE=..\..\src\motion\estimation_pvop.c # End Source File # Begin Source File SOURCE=..\..\src\motion\estimation_rd_based.c # End Source File # Begin Source File SOURCE=..\..\src\motion\gmc.c # End Source File # Begin Source File SOURCE=..\..\src\motion\motion_comp.c # End Source File # Begin Source File SOURCE=..\..\src\motion\sad.c # End Source File # Begin Source File SOURCE=..\..\src\motion\vop_type_decision.c # End Source File # End Group # Begin Group "prediction" # PROP Default_Filter "" # Begin Group "prediction_h" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\prediction\mbprediction.h # End Source File # End Group # Begin Source File SOURCE=..\..\src\prediction\mbprediction.c # End Source File # End Group # Begin Group "quant" # PROP Default_Filter "" # Begin Group "quant_asm" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\quant\x86_asm\quantize_h263_3dne.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\quant\x86_asm\quantize_h263_3dne.asm InputName=quantize_h263_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\quant\x86_asm\quantize_h263_3dne.asm InputName=quantize_h263_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\quant\x86_asm\quantize_h263_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\quant\x86_asm\quantize_h263_mmx.asm InputName=quantize_h263_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\quant\x86_asm\quantize_h263_mmx.asm InputName=quantize_h263_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\quant\x86_asm\quantize_mpeg_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\quant\x86_asm\quantize_mpeg_mmx.asm InputName=quantize_mpeg_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\quant\x86_asm\quantize_mpeg_mmx.asm InputName=quantize_mpeg_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\quant\x86_asm\quantize_mpeg_xmm.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\quant\x86_asm\quantize_mpeg_xmm.asm InputName=quantize_mpeg_xmm "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\quant\x86_asm\quantize_mpeg_xmm.asm InputName=quantize_mpeg_xmm "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # End Group # Begin Group "quant_h" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\quant\quant.h # End Source File # Begin Source File SOURCE=..\..\src\quant\quant_matrix.h # End Source File # End Group # Begin Source File SOURCE=..\..\src\quant\quant_h263.c # End Source File # Begin Source File SOURCE=..\..\src\quant\quant_matrix.c # End Source File # Begin Source File SOURCE=..\..\src\quant\quant_mpeg.c # End Source File # End Group # Begin Group "utils" # PROP Default_Filter "" # Begin Group "utils_asm" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\utils\x86_asm\cpuid.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\utils\x86_asm\cpuid.asm InputName=cpuid "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\utils\x86_asm\cpuid.asm InputName=cpuid "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\utils\x86_asm\interlacing_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\utils\x86_asm\interlacing_mmx.asm InputName=interlacing_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\utils\x86_asm\interlacing_mmx.asm InputName=interlacing_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\utils\x86_asm\mem_transfer_3dne.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\utils\x86_asm\mem_transfer_3dne.asm InputName=mem_transfer_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\utils\x86_asm\mem_transfer_3dne.asm InputName=mem_transfer_3dne "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # Begin Source File SOURCE=..\..\src\utils\x86_asm\mem_transfer_mmx.asm !IF "$(CFG)" == "libxvidcore - Win32 Release" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Release InputPath=..\..\src\utils\x86_asm\mem_transfer_mmx.asm InputName=mem_transfer_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ELSEIF "$(CFG)" == "libxvidcore - Win32 Debug" # Begin Custom Build - Assembling $(InputPath) IntDir=.\Debug InputPath=..\..\src\utils\x86_asm\mem_transfer_mmx.asm InputName=mem_transfer_mmx "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath) # End Custom Build !ENDIF # End Source File # End Group # Begin Group "utils_h" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\utils\emms.h # End Source File # Begin Source File SOURCE=..\..\src\utils\mbfunctions.h # End Source File # Begin Source File SOURCE=..\..\src\utils\mem_align.h # End Source File # Begin Source File SOURCE=..\..\src\utils\mem_transfer.h # End Source File # Begin Source File SOURCE=..\..\src\utils\ratecontrol.h # End Source File # Begin Source File SOURCE=..\..\src\utils\timer.h # End Source File # End Group # Begin Source File SOURCE=..\..\src\utils\emms.c # End Source File # Begin Source File SOURCE=..\..\src\utils\mbtransquant.c # End Source File # Begin Source File SOURCE=..\..\src\utils\mem_align.c # End Source File # Begin Source File SOURCE=..\..\src\utils\mem_transfer.c # End Source File # Begin Source File SOURCE=..\..\src\utils\timer.c # End Source File # End Group # Begin Group "xvid_h" # PROP Default_Filter "" # Begin Source File SOURCE=..\..\src\decoder.h # End Source File # Begin Source File SOURCE=..\..\src\encoder.h # End Source File # Begin Source File SOURCE=..\..\src\global.h # End Source File # Begin Source File SOURCE=..\..\src\portab.h # End Source File # Begin Source File SOURCE=..\..\src\xvid.h # End Source File # End Group # Begin Group "plugins" # PROP Default_Filter "" # Begin Group "plugins_h" # PROP Default_Filter "" # End Group # Begin Source File SOURCE=..\..\src\plugins\plugin_2pass1.c # End Source File # Begin Source File SOURCE=..\..\src\plugins\plugin_2pass2.c # End Source File # Begin Source File SOURCE=..\..\src\plugins\plugin_dump.c # End Source File # Begin Source File SOURCE=..\..\src\plugins\plugin_lumimasking.c # End Source File # Begin Source File SOURCE=..\..\src\plugins\plugin_psnr.c # End Source File # Begin Source File SOURCE=..\..\src\plugins\plugin_single.c # End Source File # End Group # Begin Source File SOURCE=..\..\src\decoder.c # End Source File # Begin Source File SOURCE=..\..\src\encoder.c # End Source File # Begin Source File SOURCE=..\..\src\xvid.c # End Source File # End Target # End Project