--- trunk/xvidcore/build/win32/libxvidcore.dsp	2002/09/21 15:16:48	505
+++ trunk/xvidcore/build/win32/libxvidcore.dsp	2003/02/15 15:22:19	851
@@ -41,7 +41,7 @@
 # PROP Intermediate_Dir "Release"
 # PROP Target_Dir ""
 # ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /Ob2 /D "NDEBUG" /D "ARCH_X86" /D "WIN32" /D "_MBCS" /D "_LIB" /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /Ob2 /D "NDEBUG" /D "ARCH_IS_IA32" /D "ARCH_IS_32BIT" /D "ARCH_IS_LITTLE_ENDIAN" /D "WIN32" /D "_MBCS" /D "_LIB" /YX /FD /c
 # ADD BASE RSC /l 0xc09 /d "NDEBUG"
 # ADD RSC /l 0xc09 /d "NDEBUG"
 BSC32=bscmake.exe
@@ -64,7 +64,7 @@
 # PROP Intermediate_Dir "Debug"
 # PROP Target_Dir ""
 # ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "_DEBUG" /D "ARCH_X86" /D "WIN32" /D "_MBCS" /D "_LIB" /FR /YX /FD /GZ /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "_DEBUG" /D "ARCH_IS_IA32" /D "ARCH_IS_32BIT" /D "ARCH_IS_LITTLE_ENDIAN" /D "WIN32" /D "_MBCS" /D "_LIB" /FR /YX /FD /GZ /c
 # ADD BASE RSC /l 0xc09 /d "_DEBUG"
 # ADD RSC /l 0xc09 /d "_DEBUG"
 BSC32=bscmake.exe
@@ -101,6 +101,18 @@
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\INSTALL
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\LICENSE
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\README.txt
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\todo.txt
 # End Source File
 # Begin Source File
@@ -120,6 +132,37 @@
 # PROP Default_Filter ""
 # Begin Source File
 
+SOURCE=..\..\src\bitstream\x86_asm\cbp_3dne.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\bitstream\x86_asm\cbp_3dne.asm
+InputName=cbp_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\bitstream\x86_asm\cbp_3dne.asm
+InputName=cbp_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\bitstream\x86_asm\cbp_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
@@ -257,6 +300,68 @@
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\src\dct\x86_asm\fdct_xmm.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\dct\x86_asm\fdct_xmm.asm
+InputName=fdct_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\dct\x86_asm\fdct_xmm.asm
+InputName=fdct_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\dct\x86_asm\idct_3dne.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\dct\x86_asm\idct_3dne.asm
+InputName=idct_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\dct\x86_asm\idct_3dne.asm
+InputName=idct_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\dct\x86_asm\idct_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
@@ -286,6 +391,37 @@
 !ENDIF 
 
 # End Source File
+# Begin Source File
+
+SOURCE=..\..\src\dct\x86_asm\simple_idct_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\dct\x86_asm\simple_idct_mmx.asm
+InputName=simple_idct_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\dct\x86_asm\simple_idct_mmx.asm
+InputName=simple_idct_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
 # End Group
 # Begin Group "dct_h"
 
@@ -307,6 +443,10 @@
 
 SOURCE=..\..\src\dct\idct.c
 # End Source File
+# Begin Source File
+
+SOURCE=..\..\src\dct\simple_idct.c
+# End Source File
 # End Group
 # Begin Group "image"
 
@@ -316,60 +456,35 @@
 # PROP Default_Filter ""
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
-
-!IF  "$(CFG)" == "libxvidcore - Win32 Release"
-
-# Begin Custom Build - Assembling $(InputPath)
-IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
-InputName=interpolate8x8_3dn
-
-"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
-
-# Begin Custom Build - Assembling $(InputPath)
-IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
-InputName=interpolate8x8_3dn
-
-"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
-
-# End Custom Build
-
-!ENDIF 
-
+SOURCE=..\..\src\image\x86_asm\colorspace_mmx.inc
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
+SOURCE=..\..\src\image\x86_asm\colorspace_rgb_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\xvid\clean0\xvidcore\src\image\x86_asm
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
-InputName=interpolate8x8_mmx
+InputPath=..\..\src\image\x86_asm\colorspace_rgb_mmx.asm
+InputName=colorspace_rgb_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
 !ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\xvid\clean0\xvidcore\src\image\x86_asm
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
-InputName=interpolate8x8_mmx
+InputPath=..\..\src\image\x86_asm\colorspace_rgb_mmx.asm
+InputName=colorspace_rgb_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -378,29 +493,31 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
+SOURCE=..\..\src\image\x86_asm\colorspace_yuv_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\xvid\clean0\xvidcore\src\image\x86_asm
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
-InputName=interpolate8x8_xmm
+InputPath=..\..\src\image\x86_asm\colorspace_yuv_mmx.asm
+InputName=colorspace_yuv_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
 !ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\xvid\clean0\xvidcore\src\image\x86_asm
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
-InputName=interpolate8x8_xmm
+InputPath=..\..\src\image\x86_asm\colorspace_yuv_mmx.asm
+InputName=colorspace_yuv_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -409,29 +526,31 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\rgb_to_yv12_mmx.asm
+SOURCE=..\..\src\image\x86_asm\colorspace_yuyv_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\xvid\clean0\xvidcore\src\image\x86_asm
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\rgb_to_yv12_mmx.asm
-InputName=rgb_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\colorspace_yuyv_mmx.asm
+InputName=colorspace_yuyv_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
 !ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\xvid\clean0\xvidcore\src\image\x86_asm
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\rgb_to_yv12_mmx.asm
-InputName=rgb_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\colorspace_yuyv_mmx.asm
+InputName=colorspace_yuyv_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -440,14 +559,14 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\yuv_to_yv12_mmx.asm
+SOURCE=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\yuv_to_yv12_mmx.asm
-InputName=yuv_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
+InputName=interpolate8x8_3dn
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
 	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
@@ -458,8 +577,8 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\yuv_to_yv12_mmx.asm
-InputName=yuv_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
+InputName=interpolate8x8_3dn
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
 	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
@@ -471,14 +590,14 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\yuyv_to_yv12_mmx.asm
+SOURCE=..\..\src\image\x86_asm\interpolate8x8_3dne.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\yuyv_to_yv12_mmx.asm
-InputName=yuyv_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_3dne.asm
+InputName=interpolate8x8_3dne
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
 	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
@@ -489,8 +608,8 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\yuyv_to_yv12_mmx.asm
-InputName=yuyv_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_3dne.asm
+InputName=interpolate8x8_3dne
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
 	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
@@ -502,14 +621,14 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\yv12_to_rgb24_mmx.asm
+SOURCE=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\yv12_to_rgb24_mmx.asm
-InputName=yv12_to_rgb24_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
+InputName=interpolate8x8_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
 	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
@@ -520,8 +639,8 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\yv12_to_rgb24_mmx.asm
-InputName=yv12_to_rgb24_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
+InputName=interpolate8x8_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
 	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
@@ -533,14 +652,14 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\yv12_to_rgb32_mmx.asm
+SOURCE=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\yv12_to_rgb32_mmx.asm
-InputName=yv12_to_rgb32_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
+InputName=interpolate8x8_xmm
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
 	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
@@ -551,8 +670,8 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\yv12_to_rgb32_mmx.asm
-InputName=yv12_to_rgb32_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
+InputName=interpolate8x8_xmm
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
 	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
@@ -564,14 +683,14 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\yv12_to_yuyv_mmx.asm
+SOURCE=..\..\src\image\x86_asm\reduced_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\yv12_to_yuyv_mmx.asm
-InputName=yv12_to_yuyv_mmx
+InputPath=..\..\src\image\x86_asm\reduced_mmx.asm
+InputName=reduced_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
 	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
@@ -582,8 +701,8 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\yv12_to_yuyv_mmx.asm
-InputName=yv12_to_yuyv_mmx
+InputPath=..\..\src\image\x86_asm\reduced_mmx.asm
+InputName=reduced_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
 	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
@@ -603,12 +722,20 @@
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\src\image\font.h
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\image\image.h
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\interpolate8x8.h
 # End Source File
+# Begin Source File
+
+SOURCE=..\..\src\image\reduced.h
+# End Source File
 # End Group
 # Begin Source File
 
@@ -616,12 +743,20 @@
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\src\image\font.c
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\image\image.c
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\interpolate8x8.c
 # End Source File
+# Begin Source File
+
+SOURCE=..\..\src\image\reduced.c
+# End Source File
 # End Group
 # Begin Group "motion"
 
@@ -663,6 +798,37 @@
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\src\motion\x86_asm\sad_3dne.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\motion\x86_asm\sad_3dne.asm
+InputName=sad_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\motion\x86_asm\sad_3dne.asm
+InputName=sad_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\motion\x86_asm\sad_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
@@ -764,8 +930,16 @@
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\src\motion\motion_est.h
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\motion\sad.h
 # End Source File
+# Begin Source File
+
+SOURCE=..\..\src\motion\smp_motion_est.h
+# End Source File
 # End Group
 # Begin Source File
 
@@ -779,6 +953,10 @@
 
 SOURCE=..\..\src\motion\sad.c
 # End Source File
+# Begin Source File
+
+SOURCE=..\..\src\motion\smp_motion_est.c
+# End Source File
 # End Group
 # Begin Group "prediction"
 
@@ -835,6 +1013,68 @@
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\src\quant\x86_asm\quantize4_xmm.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\quant\x86_asm\quantize4_xmm.asm
+InputName=quantize4_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\quant\x86_asm\quantize4_xmm.asm
+InputName=quantize4_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\quant\x86_asm\quantize_3dne.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\quant\x86_asm\quantize_3dne.asm
+InputName=quantize_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\quant\x86_asm\quantize_3dne.asm
+InputName=quantize_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\quant\x86_asm\quantize_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
@@ -941,6 +1181,68 @@
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\src\utils\x86_asm\interlacing_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\utils\x86_asm\interlacing_mmx.asm
+InputName=interlacing_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\utils\x86_asm\interlacing_mmx.asm
+InputName=interlacing_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\utils\x86_asm\mem_transfer_3dne.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\utils\x86_asm\mem_transfer_3dne.asm
+InputName=mem_transfer_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\utils\x86_asm\mem_transfer_3dne.asm
+InputName=mem_transfer_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\utils\x86_asm\mem_transfer_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"