--- trunk/xvidcore/build/win32/libxvidcore.dsp	2003/02/13 12:50:43	842
+++ branches/dev-api-4/xvidcore/build/win32/libxvidcore.dsp	2003/11/02 23:02:52	1197
@@ -25,7 +25,7 @@
 # PROP AllowPerConfigDependencies 0
 # PROP Scc_ProjName ""
 # PROP Scc_LocalPath ""
-CPP=cl.exe
+CPP=xicl6.exe
 RSC=rc.exe
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
@@ -41,7 +41,8 @@
 # PROP Intermediate_Dir "Release"
 # PROP Target_Dir ""
 # ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /Ob2 /D "NDEBUG" /D "ARCH_IS_IA32" /D "ARCH_IS_LITTLE_ENDIAN" /D "ARCH_IS_32BIT" /D "WIN32" /D "_MBCS" /D "_LIB" /YX /FD /c
+# ADD CPP /nologo /G6 /W3 /GX /Op /Ob2 /D "NDEBUG" /D "ARCH_IS_IA32" /D "ARCH_IS_32BIT" /D "ARCH_IS_LITTLE_ENDIAN" /D "WIN32" /D "_MBCS" /D "_LIB" /FAcs /YX /FD /O3 -QxK /Qunroll /c
+# SUBTRACT CPP /Z<none> /Fr
 # ADD BASE RSC /l 0xc09 /d "NDEBUG"
 # ADD RSC /l 0xc09 /d "NDEBUG"
 BSC32=bscmake.exe
@@ -64,7 +65,7 @@
 # PROP Intermediate_Dir "Debug"
 # PROP Target_Dir ""
 # ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /D "_DEBUG" /D "ARCH_IS_IA32" /D "ARCH_IS_LITTLE_ENDIAN" /D "ARCH_IS_32BIT" /D "WIN32" /D "_MBCS" /D "_LIB" /FR /YX /FD /GZ /c
+# ADD CPP /nologo /MTd /W4 /Gm /GX /ZI /Od /D "_DEBUG" /D "ARCH_IS_IA32" /D "ARCH_IS_32BIT" /D "ARCH_IS_LITTLE_ENDIAN" /D "WIN32" /D "_MBCS" /D "_LIB" /FR /YX /FD /GZ /c
 # ADD BASE RSC /l 0xc09 /d "_DEBUG"
 # ADD RSC /l 0xc09 /d "_DEBUG"
 BSC32=bscmake.exe
@@ -85,6 +86,10 @@
 # PROP Default_Filter ""
 # Begin Source File
 
+SOURCE=..\..\doc\_API_.txt
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\authors.txt
 # End Source File
 # Begin Source File
@@ -101,6 +106,18 @@
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\INSTALL
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\LICENSE
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\README.txt
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\todo.txt
 # End Source File
 # Begin Source File
@@ -120,6 +137,37 @@
 # PROP Default_Filter ""
 # Begin Source File
 
+SOURCE=..\..\src\bitstream\x86_asm\cbp_3dne.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\bitstream\x86_asm\cbp_3dne.asm
+InputName=cbp_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\bitstream\x86_asm\cbp_3dne.asm
+InputName=cbp_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\bitstream\x86_asm\cbp_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
@@ -130,7 +178,7 @@
 InputName=cbp_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -142,7 +190,7 @@
 InputName=cbp_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -161,7 +209,7 @@
 InputName=cbp_sse2
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -173,7 +221,7 @@
 InputName=cbp_sse2
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -226,17 +274,17 @@
 # PROP Default_Filter ""
 # Begin Source File
 
-SOURCE=..\..\src\dct\x86_asm\fdct_mmx.asm
+SOURCE=..\..\src\dct\x86_asm\fdct_mmx_ffmpeg.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\dct\x86_asm\fdct_mmx.asm
+InputPath=..\..\src\dct\x86_asm\fdct_mmx_ffmpeg.asm
 InputName=fdct_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -244,11 +292,104 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\dct\x86_asm\fdct_mmx.asm
+InputPath=..\..\src\dct\x86_asm\fdct_mmx_ffmpeg.asm
 InputName=fdct_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\dct\x86_asm\fdct_mmx_skal.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\dct\x86_asm\fdct_mmx_skal.asm
+InputName=fdct_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\dct\x86_asm\fdct_mmx_skal.asm
+InputName=fdct_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\dct\x86_asm\fdct_sse2_skal.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\dct\x86_asm\fdct_sse2_skal.asm
+InputName=fdct_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\dct\x86_asm\fdct_sse2_skal.asm
+InputName=fdct_xmm
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\dct\x86_asm\idct_3dne.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\dct\x86_asm\idct_3dne.asm
+InputName=idct_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\dct\x86_asm\idct_3dne.asm
+InputName=idct_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -267,7 +408,7 @@
 InputName=idct_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -279,7 +420,69 @@
 InputName=idct_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\dct\x86_asm\idct_sse2_dmitry.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\dct\x86_asm\idct_sse2_dmitry.asm
+InputName=idct_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\dct\x86_asm\idct_sse2_dmitry.asm
+InputName=idct_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\dct\x86_asm\simple_idct_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\dct\x86_asm\simple_idct_mmx.asm
+InputName=simple_idct_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\dct\x86_asm\simple_idct_mmx.asm
+InputName=simple_idct_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -307,6 +510,10 @@
 
 SOURCE=..\..\src\dct\idct.c
 # End Source File
+# Begin Source File
+
+SOURCE=..\..\src\dct\simple_idct.c
+# End Source File
 # End Group
 # Begin Group "image"
 
@@ -316,29 +523,35 @@
 # PROP Default_Filter ""
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
+SOURCE=..\..\src\image\x86_asm\colorspace_mmx.inc
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\image\x86_asm\colorspace_rgb_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\^^^dev-api-4\!!\xvidcore\src\image\x86_asm\
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
-InputName=interpolate8x8_3dn
+InputPath=..\..\src\image\x86_asm\colorspace_rgb_mmx.asm
+InputName=colorspace_rgb_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
 !ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\^^^dev-api-4\!!\xvidcore\src\image\x86_asm\
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
-InputName=interpolate8x8_3dn
+InputPath=..\..\src\image\x86_asm\colorspace_rgb_mmx.asm
+InputName=colorspace_rgb_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -347,29 +560,31 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
+SOURCE=..\..\src\image\x86_asm\colorspace_yuv_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\^^^dev-api-4\!!\xvidcore\src\image\x86_asm\
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
-InputName=interpolate8x8_mmx
+InputPath=..\..\src\image\x86_asm\colorspace_yuv_mmx.asm
+InputName=colorspace_yuv_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
 !ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\^^^dev-api-4\!!\xvidcore\src\image\x86_asm\
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
-InputName=interpolate8x8_mmx
+InputPath=..\..\src\image\x86_asm\colorspace_yuv_mmx.asm
+InputName=colorspace_yuv_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -378,29 +593,31 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
+SOURCE=..\..\src\image\x86_asm\colorspace_yuyv_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\^^^dev-api-4\!!\xvidcore\src\image\x86_asm\
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
-InputName=interpolate8x8_xmm
+InputPath=..\..\src\image\x86_asm\colorspace_yuyv_mmx.asm
+InputName=colorspace_yuyv_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
 !ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
 
 # Begin Custom Build - Assembling $(InputPath)
+InputDir=\^^^dev-api-4\!!\xvidcore\src\image\x86_asm\
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
-InputName=interpolate8x8_xmm
+InputPath=..\..\src\image\x86_asm\colorspace_yuyv_mmx.asm
+InputName=colorspace_yuyv_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -I"$(InputDir)" -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -409,17 +626,17 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\rgb_to_yv12_mmx.asm
+SOURCE=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\rgb_to_yv12_mmx.asm
-InputName=rgb_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
+InputName=interpolate8x8_3dn
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -427,11 +644,11 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\rgb_to_yv12_mmx.asm
-InputName=rgb_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_3dn.asm
+InputName=interpolate8x8_3dn
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -440,17 +657,17 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\yuv_to_yv12_mmx.asm
+SOURCE=..\..\src\image\x86_asm\interpolate8x8_3dne.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\yuv_to_yv12_mmx.asm
-InputName=yuv_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_3dne.asm
+InputName=interpolate8x8_3dne
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -458,11 +675,11 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\yuv_to_yv12_mmx.asm
-InputName=yuv_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_3dne.asm
+InputName=interpolate8x8_3dne
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -471,17 +688,17 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\yuyv_to_yv12_mmx.asm
+SOURCE=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\yuyv_to_yv12_mmx.asm
-InputName=yuyv_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
+InputName=interpolate8x8_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -489,11 +706,11 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\yuyv_to_yv12_mmx.asm
-InputName=yuyv_to_yv12_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_mmx.asm
+InputName=interpolate8x8_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -502,17 +719,17 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\yv12_to_rgb24_mmx.asm
+SOURCE=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\yv12_to_rgb24_mmx.asm
-InputName=yv12_to_rgb24_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
+InputName=interpolate8x8_xmm
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -520,11 +737,11 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\yv12_to_rgb24_mmx.asm
-InputName=yv12_to_rgb24_mmx
+InputPath=..\..\src\image\x86_asm\interpolate8x8_xmm.asm
+InputName=interpolate8x8_xmm
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -533,48 +750,38 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\yv12_to_rgb32_mmx.asm
+SOURCE=..\..\src\image\x86_asm\qpel_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
-# Begin Custom Build - Assembling $(InputPath)
+# Begin Custom Build
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\yv12_to_rgb32_mmx.asm
-InputName=yv12_to_rgb32_mmx
+InputPath=..\..\src\image\x86_asm\qpel_mmx.asm
+InputName=qpel_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
 !ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
 
-# Begin Custom Build - Assembling $(InputPath)
-IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\yv12_to_rgb32_mmx.asm
-InputName=yv12_to_rgb32_mmx
-
-"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
-
-# End Custom Build
-
 !ENDIF 
 
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\image\x86_asm\yv12_to_yuyv_mmx.asm
+SOURCE=..\..\src\image\x86_asm\reduced_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\image\x86_asm\yv12_to_yuyv_mmx.asm
-InputName=yv12_to_yuyv_mmx
+InputPath=..\..\src\image\x86_asm\reduced_mmx.asm
+InputName=reduced_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -582,11 +789,11 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\image\x86_asm\yv12_to_yuyv_mmx.asm
-InputName=yv12_to_yuyv_mmx
+InputPath=..\..\src\image\x86_asm\reduced_mmx.asm
+InputName=reduced_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -603,12 +810,20 @@
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\src\image\font.h
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\image\image.h
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\interpolate8x8.h
 # End Source File
+# Begin Source File
+
+SOURCE=..\..\src\image\reduced.h
+# End Source File
 # End Group
 # Begin Source File
 
@@ -616,12 +831,24 @@
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\src\image\font.c
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\image\image.c
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\image\interpolate8x8.c
 # End Source File
+# Begin Source File
+
+SOURCE=..\..\src\image\qpel.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\image\reduced.c
+# End Source File
 # End Group
 # Begin Group "motion"
 
@@ -642,7 +869,7 @@
 InputName=sad_3dn
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -654,7 +881,38 @@
 InputName=sad_3dn
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\motion\x86_asm\sad_3dne.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\motion\x86_asm\sad_3dne.asm
+InputName=sad_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\motion\x86_asm\sad_3dne.asm
+InputName=sad_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -673,7 +931,7 @@
 InputName=sad_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -685,7 +943,7 @@
 InputName=sad_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -704,7 +962,7 @@
 InputName=sad_sse2
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -716,7 +974,7 @@
 InputName=sad_sse2
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -735,7 +993,7 @@
 InputName=sad_xmm
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -747,7 +1005,7 @@
 InputName=sad_xmm
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -760,25 +1018,61 @@
 # PROP Default_Filter ""
 # Begin Source File
 
+SOURCE=..\..\src\motion\estimation.h
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\motion\gmc.h
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\motion\motion.h
 # End Source File
 # Begin Source File
 
+SOURCE=..\..\src\motion\motion_inlines.h
+# End Source File
+# Begin Source File
+
 SOURCE=..\..\src\motion\sad.h
 # End Source File
 # End Group
 # Begin Source File
 
-SOURCE=..\..\src\motion\motion_comp.c
+SOURCE=..\..\src\motion\estimation_bvop.c
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\motion\motion_est.c
+SOURCE=..\..\src\motion\estimation_common.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\motion\estimation_gmc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\motion\estimation_pvop.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\motion\estimation_rd_based.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\motion\gmc.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\motion\motion_comp.c
 # End Source File
 # Begin Source File
 
 SOURCE=..\..\src\motion\sad.c
 # End Source File
+# Begin Source File
+
+SOURCE=..\..\src\motion\vop_type_decision.c
+# End Source File
 # End Group
 # Begin Group "prediction"
 
@@ -804,17 +1098,17 @@
 # PROP Default_Filter ""
 # Begin Source File
 
-SOURCE=..\..\src\quant\x86_asm\quantize4_mmx.asm
+SOURCE=..\..\src\quant\x86_asm\quantize_mpeg_mmx.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\quant\x86_asm\quantize4_mmx.asm
-InputName=quantize4_mmx
+InputPath=..\..\src\quant\x86_asm\quantize_mpeg_mmx.asm
+InputName=quantize_mpeg_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -822,11 +1116,11 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\quant\x86_asm\quantize4_mmx.asm
-InputName=quantize4_mmx
+InputPath=..\..\src\quant\x86_asm\quantize_mpeg_mmx.asm
+InputName=quantize_mpeg_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -835,17 +1129,17 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\quant\x86_asm\quantize_mmx.asm
+SOURCE=..\..\src\quant\x86_asm\quantize_mpeg_xmm.asm
 
 !IF  "$(CFG)" == "libxvidcore - Win32 Release"
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Release
-InputPath=..\..\src\quant\x86_asm\quantize_mmx.asm
-InputName=quantize_mmx
+InputPath=..\..\src\quant\x86_asm\quantize_mpeg_xmm.asm
+InputName=quantize_mpeg_xmm
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -853,42 +1147,92 @@
 
 # Begin Custom Build - Assembling $(InputPath)
 IntDir=.\Debug
-InputPath=..\..\src\quant\x86_asm\quantize_mmx.asm
-InputName=quantize_mmx
+InputPath=..\..\src\quant\x86_asm\quantize_mpeg_xmm.asm
+InputName=quantize_mpeg_xmm
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
 !ENDIF 
 
 # End Source File
-# End Group
-# Begin Group "quant_h"
-
-# PROP Default_Filter ""
 # Begin Source File
 
-SOURCE=..\..\src\quant\adapt_quant.h
-# End Source File
-# Begin Source File
+SOURCE=..\..\src\quant\x86_asm\quantize_h263_3dne.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\quant\x86_asm\quantize_h263_3dne.asm
+InputName=quantize_h263_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\quant\x86_asm\quantize_h263_3dne.asm
+InputName=quantize_h263_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
 
-SOURCE=..\..\src\quant\quant_h263.h
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\quant\quant_matrix.h
+SOURCE=..\..\src\quant\x86_asm\quantize_h263_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\quant\x86_asm\quantize_h263_mmx.asm
+InputName=quantize_h263_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\quant\x86_asm\quantize_h263_mmx.asm
+InputName=quantize_h263_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
 # End Source File
+# End Group
+# Begin Group "quant_h"
+
+# PROP Default_Filter ""
 # Begin Source File
 
-SOURCE=..\..\src\quant\quant_mpeg4.h
+SOURCE=..\..\src\quant\quant.h
 # End Source File
-# End Group
 # Begin Source File
 
-SOURCE=..\..\src\quant\adapt_quant.c
+SOURCE=..\..\src\quant\quant_matrix.h
 # End Source File
+# End Group
 # Begin Source File
 
 SOURCE=..\..\src\quant\quant_h263.c
@@ -899,7 +1243,7 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\quant\quant_mpeg4.c
+SOURCE=..\..\src\quant\quant_mpeg.c
 # End Source File
 # End Group
 # Begin Group "utils"
@@ -920,7 +1264,7 @@
 InputName=cpuid
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -932,7 +1276,69 @@
 InputName=cpuid
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\utils\x86_asm\interlacing_mmx.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\utils\x86_asm\interlacing_mmx.asm
+InputName=interlacing_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\utils\x86_asm\interlacing_mmx.asm
+InputName=interlacing_mmx
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\utils\x86_asm\mem_transfer_3dne.asm
+
+!IF  "$(CFG)" == "libxvidcore - Win32 Release"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Release
+InputPath=..\..\src\utils\x86_asm\mem_transfer_3dne.asm
+InputName=mem_transfer_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+
+# End Custom Build
+
+!ELSEIF  "$(CFG)" == "libxvidcore - Win32 Debug"
+
+# Begin Custom Build - Assembling $(InputPath)
+IntDir=.\Debug
+InputPath=..\..\src\utils\x86_asm\mem_transfer_3dne.asm
+InputName=mem_transfer_3dne
+
+"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -951,7 +1357,7 @@
 InputName=mem_transfer_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -963,7 +1369,7 @@
 InputName=mem_transfer_mmx
 
 "$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-        nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
+	nasm -f win32 -DPREFIX -o $(IntDir)\$(InputName).obj $(InputPath)
 
 # End Custom Build
 
@@ -1017,10 +1423,6 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\utils\ratecontrol.c
-# End Source File
-# Begin Source File
-
 SOURCE=..\..\src\utils\timer.c
 # End Source File
 # End Group
@@ -1033,10 +1435,6 @@
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\divx4.h
-# End Source File
-# Begin Source File
-
 SOURCE=..\..\src\encoder.h
 # End Source File
 # Begin Source File
@@ -1052,13 +1450,41 @@
 SOURCE=..\..\src\xvid.h
 # End Source File
 # End Group
+# Begin Group "plugins"
+
+# PROP Default_Filter ""
+# Begin Group "plugins_h"
+
+# PROP Default_Filter ""
+# End Group
 # Begin Source File
 
-SOURCE=..\..\src\decoder.c
+SOURCE=..\..\src\plugins\plugin_2pass1.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\plugins\plugin_2pass2.c
 # End Source File
 # Begin Source File
 
-SOURCE=..\..\src\divx4.c
+SOURCE=..\..\src\plugins\plugin_dump.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\plugins\plugin_lumimasking.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\plugins\plugin_psnr.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\src\plugins\plugin_single.c
+# End Source File
+# End Group
+# Begin Source File
+
+SOURCE=..\..\src\decoder.c
 # End Source File
 # Begin Source File